GS542F is a new design of mid-power led module. 3 chips LED makes it with higher light efficiency.  Adopting secondary optic design technology, high light transmittance PMMA lens, 170 degree wide beam angle, greatly improve the light evenness on the surface;Al substrate for LED and components , with better heat dissipation. LED’s working circuit is constant current, effectively prevent the unstable power supply effecting the LED lifespan.

With PVC injection technology, good protective property, nice structure and design. This product has our own patent Features:

• Adopting SMD2835 as light source, with high purity aluminum PCB, better heat transfer.
•  LED use customized 3 chips packaged, higher light efficiency.
• Constant current driver ensuring full bunch with consistent brightness and stably working.
• Al substrate for LED and components , with better heat dissipation.
• Secondary optic design, 170 degree visual angle, no light dots, good light uniformity.
• Best sealed, IP65 with moisture-proof, water-proof, dust-proof and impact resistance.
• Adopting PVC injection molding technology, with nice structure & design.
• All raw materials are in accordance with RoHS.

Parameters:

• Input Voltage:DC12V
• Input Current:100mA±10%
• Power:1.2W±10%
• Drive Mode: Constant Current.
• Light Source:SMD2835
• LM/W: 80lm
• Beam Angel:170 degree.
• CCT:3000/5500/6000/15000K
• Size:54*18*7.2mm
• Modules distance( center to center):196mm
• Individual package(100pcs/bag):350*250*64
• IP rank:IP65
• Life span: 30000Hours
• Working temperature:-20℃-50℃

Light Attenuation Graph:

Light Distribution Curve:

Product Sketch:

Application notice:

• The output of power supply should be matched with the module’s working voltage as module does’t have short circuit protection,overloading protection.So the selected power supply is strongly selected short circuit protection and overloading protection functions. The +/- of the modules should be connected rightly: red-anode and white-cathode.
• Max 20pcs in one bunch, better not more than this as it will cause lower brightness or danger. If need over 20pcs modules, suggested first in series then parelles.

• Power supply should be 20-30% more than the exact LEDs power and wires should be a little bigger than the current which is needed.

• Modules forbidden to put into a inflammable substance,never be covered with a tight cover or onto the heat insulated sheet materials.

• In case of installation or replacement,sure first to cut off power.

• This type LED modules are not for dimmable function.

• If there is something unusual ( dark or flickering),pls check firstly power is right on or output voltage is correct. If all is right ,please change the module.

• This modules are only used for light boxes, signs which has cover to protect modules,not used in outdoor or directly opening conditions.